1800 Series - 3 Piece Diverter Ball Valve, Side Entry
1800 Series - 3 Piece Diverter Ball Valve, Side Entry
The AVCO 1800 series side entry diverter ball valve uses a 90 degree ball to swap or divert flow from one port to another or change one media flow to another media flow through a common port. This gives an easy solution to flush systems via one control point or a single point entry into a chemical mix tank. The valve gives high Cv and low noise due to the increased port diameters and offers long life service in the most demanding conditions. Pressure classes listed in ASME B16.34 up to class 600 are catered for and flange ratings to 600# (ASME B16.5) plus other end styles are available from stock. The ISO mount pad gives the ability to actuate this valve with many standard products like electric spring return actuators, thus allowing remote and rapid operation such as that required in blow-down or exhaust vent systems. As with all the 1000 series models, material choice is paramount and almost any media such as acid, resin or hardener can be handled by the valve. The broad range of metal alloys and plastics ensures that the perfect solution will be found.
Size
1/4"- 4" (Full Port)
Valve Body Materials
316 Stainless Steel
Carbon Steel
Hastelloy C
Monel 400
AL6XN
Ball Configuration Options
90░ Rotation
Hardened and Lapped
Seat Materials
TFE
RTFE
CTFE
PEEK
UHMWPE
PCTFE
End Connections
NPT
Butt Weld
Socket Weld
Flanged: 150#, 300#, 600#
Grooved
Flush Bottom Tank
British Standard Pipe
Army/Navy
Service Applications
Hydraulic
Steam
Oxygen
Vacuum
Thermal Fluids
Chemical
Oil/Gas
Food Processing
Dry/Liquid Chlorine
Options
Emissions Bonnet
Purge Ports
Cavity Filled Seats
Electro-Polish
Mechanical Polish to 10 Ra
O2 Cleaned and Bagged
Valve Actuation
Electric Actuator
Pneumatic Acuator
Oval Handle
Spring-Return
Stem Extensions
Fusible Link
Locking Device
Gear Operators
Wing Handle


Engineering assistance is available for product selection, system control and valve actuation.